V70 L5-2.4L VIN 55 B5254S (1998)
Brake Switch (Cruise Control): Adjustments
Stop (brake) light switch early type
Adjustment
-
Pedal jack removed and brake pedal released.
-
Undo locknut if not already loose.
-
Connect battery negative lead if disconnected.
-
Unscrew stop (brake) light switch (from brake pedal) until stop (brake) light lights.
-
Screw switch in gently (towards brake pedal) until stop (brake) light goes out again.
-
Tighten locknut. Ensure that switch position does not change.
-
Check that wiring is not twisted.
-
Install soundproofing.