V70 L5-2.4L VIN 55 B5254S (1998)
5. Installation of new cable
-
Insert cable in opening in center console.
-
On right-hand drive models only:
Ensure that cable is positioned to left of heater drain hose as illustrated. See arrow.
-
Secure cable with retaining clip
-
Connect cable to locking plate
-
Install cable adjuster in gear selector housing.
6. Left-hand drive models:
-
Insert cable in ignition switch.
-
Clip cable in position.
-
Four clips are used on left-hand drive models.
7. On right-hand drive models:
-
Insert cable in ignition switch.
-
Clip cable in position.
Two clips are used on right-hand drive models.
Basic Adjustment Of Cable