V70 L5-2.5L Turbo VIN 59 B5254T2 (2004)
-
Remove the left-hand front side panel. First remove the cover and the screw from the front edge
-
Pull the top of the panel out until the clips release
-
Fold the panel inwards. Lift the panel out. The panel will not be used again. There is a new panel in the kit.
-
Cut off the protruding plastic flange. Use a hacksaw. See the illustration.
Cable routing
-
Route the DIN cable for the CD changer up between the front air duct (1) and the bulkhead stay (2)
-
Route the cable through the radio compartment
-
Secure the cable in the stay. Use a tie strap (3)
-
Route the cable above and along the front air duct to the seat mounting member (4)
-
Clamp the cable to the existing cable harness (5).