Volvo Workshop Service and Repair Manuals

Exposing connectors
Lift up the rear seat cushion, see:
Removal, replacement and installation
Body and interior
Interior
Rear seat, passenger seat, seat
Upholstery seat cushion, replacing
Lift the insulation on the right side and expose the
connectors.
Dismantling

2.

Dismantling connector
Remove the six-pin connector from the attaching plate.
Unplug the connector.

Removal

3.

Remove secondary lock

Release the catch and pull out the secondary lock.
Use dismantling tool 951 2853 or a radio
screwdriver, see figure.

4.

Remove cable