V70 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Crankshaft: Specifications
Tightening Torque
Tightening The Intermediate Section
CAUTION: The M8 screws on the exhaust side are two different lengths.
Tighten the screws in the following order:
1. All M10 screws....................................................................................................................................................................................................20 Nm
2. All M10 screws....................................................................................................................................................................................................45 Nm
3. All M8 screws......................................................................................................................................................................................................24 Nm
4. All M7 screws......................................................................................................................................................................................................17 Nm
5. Angle-tighten all M10 screws........................................................................................................................................................................90 degrees
Tighten the screws in sequence from the center and outwards.