V70 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Finishing
Install (common)
-
the plugs for the test holes. Tighten to 20 Nm
-
the ignition coils according to the earlier markings
-
the ground connections
-
the connector for the variable valve timing solenoid.
Remove tool 999 5754.
Install (naturally aspirated engine)
-
the trigger wheel. Tighten to 17 Nm.
NOTE: Ensure that the trigger wheel is correctly positioned against the camshaft.
-
the camshaft position (CMP) sensor housing
-
the cover over the ignition coils
-
the upper timing cover
-
the crankcase ventilation hose on the inlet hose
-
the inlet hose between the air cleaner (ACL) and throttle body (TB)
