V70 L5-2.5L Turbo VIN 59 B5254T2 (2004)
-
Ensure that there is sufficient slack in the cable harness between the ignition cable connector and the first tie strap (1).
Alternative 1 (vehicles without protective sheath on the ignition cable)
-
Install the other tie strap approximately 40 mm below the black mark (2) on the ignition cable.
Alternative 2 (vehicles with protective sheath on the ignition cable)
-
Install the second tie strap at the light mark (1) on the protective sheath.
-
Install the third tie strap under the seat cushion
-
Install the airbag
-
Install the 2 M5 screws.
Tighten to 6 Nm
-
Install the protective pad
-
Install the 2 elastic attachments on the inside/reverse of the backrest.
-
Pull down the backrest cushion upholstery so that the half moon clips can be installed.