V70 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Remove the gear selector from the lever and the cable mounting from the transmission.
Unhook the mounting with the connector for the transmission from the bracket for the air cleaner (ACL) housing.
Remove the tie straps for the cable harness and the mounting in the cover for the control system.
Separate the connector for the gear-shift position sensor. Remove the gear-shift position sensor from the mounting.
Removing the gear-shift position sensor
Remove:
-
the lever for the gear shift linkage rod
-
the nut, locking washer and rubber seal securing the gear-shift position sensor to the gear shift linkage rod
-
the 2 screws
-
the gear-shift position sensor.
Installation
Installing the gear-shift position sensor
Install:
-
the sensor. Lightly tighten the 2 screws
-
the rubber washer, the lock washer and the nut on the sensor.
Tighten the nut. Lock the nut with the locking washer.