V70 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Note! For tightening torques, see the relevant specifications.
Installing the sensor
Install the new sensors.
Apply a little petroleum jelly to the O-rings for the sensors. Tighten. See the relevant specifications.
-
Install the connectors for the sensors on the mounting. Assemble the connectors
-
Install the tie straps for the cable harness
-
Hook the mounting for the connectors on to the bracket for the air cleaner (ACL) housing
-
Secure the cable harness mounting in the control system cover.
Installing the air cleaner (ACL) housing
Install the air cleaner (ACL) housing, including all hoses and electrical terminals.
Check and erase any diagnostic trouble codes (DTCs).