V70 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Rear Knuckle Alignment Link: Service and Repair
Bushing Inner Tie Rod, Replacing
Bushing inner tie rod, replacing
Special tools:
951 2923 Hydraulic hole cylinder See: Tools and Equipment/951 2923 Hydraulic Hole Cylinder
999 7034 Connecting rod M12X400 See: Tools and Equipment/999 7034 Connecting Rod M12X400
999 7035 Sleeve See: Tools and Equipment/999 7035 Sleeve
999 7036 Drift See: Tools and Equipment/999 7036 Drift
999 7054 Adapter incl. 2x MC6C M6X12 See: Tools and Equipment/999 7054 Adapter Incl. 2X MC6C M6X12
Removal
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.
Preparations
-
Mark up the position on the spacer eccentric
-
Remove the screw for the tie rod mounting
-
Twist the tie rod down.
Removing the bushing