V70 2.4 L5-2.4L VIN 61 B5244S (2001)
Communications Control Module: Scan Tool Testing and Procedures
Description of Reading Extended Diagnostic Trouble Code (DTC) Information
Description of reading extended diagnostic trouble code (DTC) information
Contents
Select type of description.
-
Counters, description
-
Status identifier, description
Description of Parameters
Description of parameters
Signal strength
Indicates signal amplitude in the interval 0-255. To obtain corresponding dBµV-value, use the following conversion table.
Due to tolerances of the units, the values in the conversion table shall be regarded as approximate.
Note! Parameters that show status of the buttons are only available for vehicles equipped with steering wheel buttons as well as on model year
2005 and later.
The following buttons refer to the steering wheel buttons.
Buttons have two possible status modes:
Off = Control module does not consider selected button pressed in.
On = Control module considers selected button pressed in.
Buttons
Volume up
The value shows if the button for adjusting volume up is pressed in.
Volume down
The value shows if the button for adjusting volume down is pressed in.
Next up
The value shows if the button for selecting next sound track or radio station is pressed in.
Next down
The value shows if the button for selecting previous sound track or radio station is pressed in.
On-button, telephone (green telephone)
The value shows if the on-button for the telephone is pressed in.
Off-button, telephone (red telephone)
The value shows if the off-button for the telephone is pressed in.