V70 2.4 L5-2.4L VIN 61 B5244S (2001)
screwdriver
-
Remove the screw from the control module
-
Remove the control module.
Check
Check that the control module connectors are intact.
Installing the control module
-
Screw the control module screw into place
-
Connect the connector for the control module
-
Reinstall the cover for the control module connector
-
Connect the 2 connectors
-
Press the bulb holder into place
-
Install the ground lead
-
Install the 2 screws at the front edge
-
Install the lens.
Finishing
Program in the data read off from the old control module.