volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Customer Interest for Seat Heater Control Module: > < Radio - Interference/Noise On AM Band|Page 163
Page 10
background image

17

Connecting the ground terminal

Fold up the insulation panel under the rear seat. 

Remove the rear ground terminal 31/47. 

Install the ground lead together with the removed wiring using a new screw from the kit. Tighten the screw.

Tighten to 10 Nm (7 lbf.ft).

Fold the:

-

insulation back into place

-

rear seat back into position.

Install the battery negative terminal, see VADIS:

Repair and installation Function group 31 Replacing the battery.

Discard the excess material from the kit.

Customer Interest for Seat Heater Control Module: > < Radio - Interference/Noise On AM Band|Page 163