V70 2.4 L5-2.4L VIN 61 B5244S (2001)
-
Expose the relay box for better access.
-
Replace relay/shunt.
Relay position
For position of relays, see:
1. Wiring diagram for model year in question
2. Decals by respective relay and fuse box in the vehicle
3. Pocket Data booklet
4. Driver's manual
Installing the relay box in the passenger compartment
-
Install the relay box on the bracket
-
Press the relay box forward so that the catches engage in the bracket and "click".
-
Install the soundproofing panel on the driver's side.
Removing the control module
Preparations
Caution! The customer-programmed data must be read off before the control module is replaced. The information must then be entered into
the new control module after it has been installed. This is performed via VIDA vehicle communication.
Note! The driver information module (DIM) must not be replaced at the same time. This would erase the mileage.
Note! Before disconnecting the control module's connector, remove fuses 11C/32, 11C/25 and 11C/21.
Removing the connector and the cover
