V70 2.4 L5-2.4L VIN 61 B5244S (2001)
-
Check that no pins or sockets are damaged on the connector
-
Gently press the control module down into the grooves inside the control module box. Press to the limit position!
-
Insert tool 999 5722 around the control module
-
Move the upper section of the tool forwards as far as it will go. Pull the tool up
-
Press the cover into place over the control modules
-
Check that the air ducts are correctly positioned.
Ordering software
Refer to parts supplier:
Finishing
Check that no diagnostic trouble codes have been stored during the repair.
Test drive the car. Check that the function of the engine is OK.
