volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Reading and Clearing Diagnostic Trouble Codes|Page 1111 > < Reading and Clearing Diagnostic Trouble Codes|Page 1109
Page 59
background image

Condition

-

No SWM diagnostic trouble codes are displayed in the CEM

-

No diagnostic trouble codes are displayed in the SWM.

Possible source

-

Defective indicator switch

-

Defective control unit.

Fault symptom[s]

-

Text message in combined instrument cannot be erased.

Checking the Read Button on the Turn Signal Lamp Switch

Checking the read button on the turn signal lamp switch

Checking components

Activate the read button on the turn signal lamp switch. Read off the status.

Hint: If the read button status is OK the fault is not in the steering wheel module (SWM).

Was the status of the read button correct?

Yes - No Fault Found

No - Replacing the component

-------------------------------------------------

Replacing the component

Replace the turn signal lamp switch

Other information:

-

To replace the turn signal lamp switch, see Turn signal switch, replacing, M58, M66, M66 AWD, AW50/51 AWD, AW55-50/51SN, M56 See:
Lighting and Horns/Sensors and Switches - Lighting and Horns/Turn Signal Switch/Service and Repair/Turn Signal Switch, Replacing.

Select "Continue" when the fault has been remedied.

Continue - Checking components

-------------------------------------------------

Checking components

Activate the read button on the turn signal lamp switch. Read off the status.

Hint: If the read button status is OK, the fault is in the turn signal lamp switch.

Was the status of the read button correct?

Reading and Clearing Diagnostic Trouble Codes|Page 1111 > < Reading and Clearing Diagnostic Trouble Codes|Page 1109