volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Reading and Clearing Diagnostic Trouble Codes|Page 1112 > < Reading and Clearing Diagnostic Trouble Codes|Page 1110
Page 60
background image

Yes - Fault Found

No - Replacing the component

-------------------------------------------------

Replacing the component

Try replacing the steering wheel module (SWM).

Caution! A new control module is delivered without software. The control module must be programmed in order to function after replacement.

Other information:

-

To replace and program the steering wheel module (SWM), see Steering wheel module (SWM), replacing See: Steering Column Control
Module/Service and Repair.

Was a fault detected?

Yes - Fault Found

No - No Fault Found

-------------------------------------------------

Trouble-Shooting Information

Trouble-shooting information

Condition

-

No SWM diagnostic trouble codes are displayed in the CEM

-

No diagnostic trouble codes are displayed in the PHM.

Possible source

-

Open circuit, short-circuit to earth or short-circuit to voltage supply on the wire

Reading and Clearing Diagnostic Trouble Codes|Page 1112 > < Reading and Clearing Diagnostic Trouble Codes|Page 1110