volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Reading and Clearing Diagnostic Trouble Codes|Page 1124 > < Reading and Clearing Diagnostic Trouble Codes|Page 1122
Page 72
background image

Checking the steering wheel module (SWM)

Fault-tracing information

Before continuing with fault-tracing, the following must be checked:

-

All tests for the relevant symptom must have been carried out

-

No component, connector or wiring faults etc. should have been detected.

Have all tests been carried out and no faults detected?

Yes - Replacing the component

No - No Fault Found

-------------------------------------------------

Replacing the component

Try replacing the steering wheel module (SWM).

Caution! A new control module is delivered without software. The control module must be programmed in order to function after replacement.

Other information:

-

To replace and program the steering wheel module (SWM), see Steering wheel module (SWM), replacing See: Steering Column Control
Module/Service and Repair.

Was a fault detected?

Yes - Fault Found

No - No Fault Found

-------------------------------------------------

Fault-Tracing Information

Reading and Clearing Diagnostic Trouble Codes|Page 1124 > < Reading and Clearing Diagnostic Trouble Codes|Page 1122