volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Reading and Clearing Diagnostic Trouble Codes|Page 1135 > < Reading and Clearing Diagnostic Trouble Codes|Page 1133
Page 83
background image

Was the wiper switch status OK?

Yes - No Fault Found

No - Replacing the component

-------------------------------------------------

Replacing the component

Replace the wiper switch.

Other information:

-

To replace the wiper switch, see Washer / wiper switch, replacing, B5244T5, B5254T2 See: Sensors and Switches/Sensors and Switches - Wiper
and Washer Systems/Wiper Switch/Service and Repair.

Select "Continue" when the fault has been remedied.

Continue - Checking components

-------------------------------------------------

Checking components

Activate the washer using the windshield wiper switch. Read off the status.

Hint: The fault is in the windshield wiper switch if the windshield wiper switch status is OK.

Was the wiper switch status OK?

Yes - Fault Found

No - Replacing the component

-------------------------------------------------

Replacing the component

Try replacing the steering wheel module (SWM).

Caution! A new control module is delivered without software. The control module must be programmed in order to function after replacement.

Other information:

-

To replace and program the steering wheel module (SWM), see Steering wheel module (SWM), replacing See: Steering Column Control
Module/Service and Repair.

Reading and Clearing Diagnostic Trouble Codes|Page 1135 > < Reading and Clearing Diagnostic Trouble Codes|Page 1133