volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Reading and Clearing Diagnostic Trouble Codes|Page 1145 > < Reading and Clearing Diagnostic Trouble Codes|Page 1143
Page 93
background image

Was a fault detected?

Yes - Fault Found

No - No Fault Found

-------------------------------------------------

Checking the Power Supply and Ground Terminals. Intermittent Fault

Checking the power supply and ground terminals. Intermittent fault

Checking the power supply and ground for the control module

Check steering wheel module connector A. Check for contact resistance and oxidation.
Check fuse 22 in the passenger compartment fusebox for the steering wheel module.
Note! If the fuse was blown, check the circuit after the fuse. Check for contact resistance and oxidation.
Check the cable for power supply between fuse 22 in the passenger compartment fusebox and the control module terminals #A1 and #A6. Check for an
open-circuit.
Check the ground lead between control module #A22 and ground terminal 31/84. Check for an open-circuit.
Check ground terminal 31/84. Check for contact resistance and oxidation.
Remedy as necessary.

Other information:

-

To access the control module, see Steering wheel module (SWM), replacing See: Steering Column Control Module/Service and Repair 

Reading and Clearing Diagnostic Trouble Codes|Page 1145 > < Reading and Clearing Diagnostic Trouble Codes|Page 1143