volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Reading and Clearing Diagnostic Trouble Codes|Page 951 > < Reading and Clearing Diagnostic Trouble Codes|Page 949
Page 5
background image

Was the direction indicator switch status OK?

Yes - No Fault Found

No -  Replacing a component 

-------------------------------------------------

Replacing a component

Change direction indicator switch.

Other information:

-

Turn signal switch, replacing See: Lighting and Horns/Sensors and Switches - Lighting and Horns/Turn Signal Switch/Service and Repair/Turn
Signal Switch, Replacing 

Select continue when the defect has been remedied.

Continue -  Checking components 

-------------------------------------------------

Checking components

Activate the turn signal lamp switch. Read off the status.

Hint: If the direction indicator switch status is OK the problem is in the direction indicator switch.

Was the direction indicator switch status OK?

Yes - Fault Found

No -  Checking the windshield wiper switch 

-------------------------------------------------

Replacing a component

Try replacing the control module.

Caution! A new control module is delivered without software. The control module must be programmed in order to function after replacement.

Other information

-

Steering wheel module (SWM), replacing See: Steering Column Control Module/Service and Repair 

Reading and Clearing Diagnostic Trouble Codes|Page 951 > < Reading and Clearing Diagnostic Trouble Codes|Page 949