V70 2.4 L5-2.4L VIN 61 B5244S (2001)
Check the voltage between terminals #B1 and #B3. Voltage should be approximately 12 V.
Check the voltage between terminals #B2 and #B3. Voltage should be approximately 5 V.
Check the voltage between terminal #B3 and the battery negative terminal. Voltage should be approximately 0 V.
If the above readings are OK, the fault is in the cruise control switch.
Other information:
-
To connect the breakout box, see Connecting the breakout box See: Pinout Values and Diagnostic Parameters/Connecting the Breakout Box,
Steering Wheel Module (SWM).
Was a fault detected?
Yes - Fault Found
No - No Fault Found
-------------------------------------------------
Checking the Error Message
