volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 2330 > < Diagram Information and Instructions|Page 2328
Page 50
background image

Connector, assembling

Primary lock

Check that the cable terminal is undamaged.
Press the cable terminal into the housing.
Check that the cable terminal is properly locked by pulling carefully on the cable.

The secondary lock

Press the secondary lock into place.

Connector Type 7

Connectors, repair

Special tools:
951 2633 Terminal removal tool  See: Tools and Equipment/951 2633 Terminal Removal Tool

951 2639 Terminal removal tool  See: Tools and Equipment/951 2639 Terminal Removal Tool

951 2637 Terminal removal tool  See: Tools and Equipment/951 2637 Terminal Removal Tool

951 2812 Terminal removal tool See: Tools and Equipment/951 2812 Terminal Removal Tool.

Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.

Connector, dismantling

Secondary lock

Press out the secondary lock from the cable side using tool 951 2633 Terminal removal tool  See: Tools and Equipment/951 2633 Terminal Removal
Tool or an electrician's screwdriver, as illustrated.

Diagram Information and Instructions|Page 2330 > < Diagram Information and Instructions|Page 2328