V70 2.4 L5-2.4L VIN 61 B5244S (2001)
-
Take out the screw, washer, nut and bracket from the kit.
-
Place the bracket over the drilled hole with the text (1) facing backwards. Mark out to cut off the corner of the bumper cover as illustrated.
-
Cut off the corner.
-
Fit the bracket (with the text (1) facing backwards), with the screw, washer and nut. Do not tighten the bracket yet.
-
Place the connector on the bracket as illustrated.
-
Adjust the position of the bracket with the connector and tighten the screw/nut correctly.
Connector Relay Box, Repair
Connector relay box, repair
Special tools:
951 2633 Terminal removal tool See: Tools and Equipment/951 2633 Terminal Removal Tool
951 2639 Terminal removal tool See: Tools and Equipment/951 2639 Terminal Removal Tool
951 2852 Terminal removal tool See: Tools and Equipment/951 2852 Terminal Removal Tool.
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.
Preparatory work
