V70 2.4T L5-2.4L Turbo VIN 58 B5244T3 (2002)
If the car is opened with a key, the memory settings for the seat are not affected. Remote operation of the seat is not possible if the key is in the ignition
switch.
On model year 1999-2002 cars, the system may exhibit unwanted properties. Only information about which remote control unlocked the car is
transmitted, a new memory position is not stored if the car was unlocked before this. This is because when a car door is opened and the power seat
module (PSM) switches into active mode, the module is unable to identify which remote control is being used.
In addition, when a door is open, it takes 10 minutes before the power seat module (PSM) switches to sleep mode. If this occurs, and the customer then
attempts to set a new seat position, the information about which remote control opened the door will have been lost and a new memory position will not
be stored.
Maneuvering seats without memory
Power seats without memory do not have memory management buttons. The seat motors can only be operated directly via the control panel. This type of
seat does not have a power seat module (PSM). The seat motors are directly connected to the control panel.
