V70 2.4T L5-2.4L Turbo VIN 58 B5244T3 (2002)
-
Connect the long cable with green connector and DIN cable to the adapter cable on the Jukebox.
-
Connect the brown ground cable (1) with matching cable on the jukebox.
-
Collect any excess cable and clamp it in by the existing cable harnesses by the fuse holder with a tie strap from the kit.
-
Remove the M6 screw (1) in the left-hand cargo floor support.
-
Take two screws from the kit and the removed M6 screw and tighten the bracket with Jukebox to the body. Torque tighten the M8 screws to 24
Nm (18 lbf.ft.) and the M6 screw to 10 Nm (7 lbf.ft.).
Applies to cars up to and including model year -2004 (V70 CH -458999, XC70 CH -172999)
-
Take the new insulation panel from the kit, thread it over the brackets to the fuse holder and install it in the correct position.
-
Secure it with the clip (1) from the kit.
-
Reinstall the fuse holder.
