volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Reset Procedure|Page 16297 > < Reset Procedure|Page 16295
Page 36
background image

Applies to cars from model year 2005- (V70 CH 459000-, XC70 CH 173000-)

-

Take the cable (1) for power supply from the kit. Connect the ground lead to the existing ground terminal behind the battery. Tighten to 10 Nm (7
lbf.ft.)
.

-

Position the cable end with the two red/white (R/W) single cables and the two green connectors (2) by the rear fuse holder.

-

Route the cable harness on the left-hand side of the cargo floor support.

-

Roll together the excess cable and clamp it neatly together with a tie strap from the kit.

-

Remove the two screws (1) in the DVD drive bracket and remove the bracket with DVD drive.

-

Unplug the power supply connector (1) to the DVD unit.

Reset Procedure|Page 16297 > < Reset Procedure|Page 16295