V70 2.4T L5-2.4L Turbo VIN 58 B5244T3 (2002)
-
Carefully remove the small loudspeaker grille. Pry around the edge using a plastic weatherstrip tool.
NOTE: Do not damage the loudspeaker grille.
-
Remove the six lock facings (1) holding the trim strip at the door panel. Use a screwdriver to pry up the rear lock facings slightly. Then cut the
lock facings using cutting pliers. Use the bent section of a double ended scriber to pull up the front lock facings slightly (sunk in the plastic panel)
to cut off them off.
-
Remove the trim strip. First pull the door opener handle. Pull off the trim strip.
-
Install the new trim strip on the door panel. Press the trim strip into place.
-
Create a counterhold on the trim strip using a soft, clean rag.
-
This is to prevent damage. At the same time install locking washers on the lugs (1) on the reverse of the door panel.
-
Securely press the locking washers into place as illustrated.
NOTE: Do not damage the door panel and trim strip.
Applies to both front doors:
-
Reinstall the loudspeaker grille.
-
Reinstall the inner handle for the door. Screw the door handle into place.
