V70 2.4T L5-2.4L Turbo VIN 58 B5244T3 (2002)
Remove the lifting table.
Finishing
-
Pop rivet the exhaust pipe heat deflector into the left rear subframe mounting.
-
Install the fender liner. Tighten the fender liner with the plastic nut.
Install
-
the parking brake cable mounting in the sub-frame. Tighten to 25 Nm.
-
the mounting for parking brake cable on the track rod
-
the exhaust system.
-
the springs and shock absorbers.
Note: At the same time, tighten the track rods and support arms to the sub-frame. Tighten to 80 Nm.
Use tensioner 999 5659 according to Tensioner 999 5659 User instructions.
