volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Cup Holder, Replacing|Page 18579 > < Cup Holder, Replacing|Page 18577
Page 4
background image

-

Angle the dashboard environment panel outwards so that it is possible to insert a couple of fingers between the centre console and the side of the
dashboard environment panel.

Remove:

-

the dashboard environment panel. Pull it downward, maintaining the same angle. Some force is required because the panel is tightly installed

-

the connectors on the reverse of the dashboard environment panel. Put the dashboard environment panel to one side.

Note! If any of the outer hooks break off, these must be repaired. See the section about the dashboard in the workshop manual in VIDA.

-

Remove the screws in the radio bracket

-

Pull out the lower edge of the radio bracket. At the same time press downwards.

Remove:

-

the connectors on the reverse of the radio

-

the radio bracket.

-

Remove the existing centre console locker. First press in the catches on the top and underneath of the centre console locker. Then pull the centre
console locker from the cut out.

Cup Holder, Replacing|Page 18579 > < Cup Holder, Replacing|Page 18577