V70 2.4T L5-2.4L Turbo VIN 58 B5244T3 (2002)
Install the wheel
Install the integrated relay / fusebox and the connector for the ABS unit
Hydraulic unit, replacing.
Install the Air Cleaner (ACL) housing
Brake pipe master cylinder / ABS unit, replacing.
Fill and bleed the brake system
Brake Pipe, Rear Wheel, Replacing
Brake pipe, rear wheel, replacing
Preparations for replacement. Applies to both left and right sides
Collect the brake fluid
See Replacing the brake fluid (using a bleeding unit) See: Brake Fluid/Service and Repair/Replacing the Brake Fluid (Using A Bleeding Unit)
See Brake fluid, replacing See: Brake Fluid/Service and Repair/Brake Fluid, Replacing
Replacing the brake pipe for the right rear wheel
Preparations
Remove the 4 screws holding the heat deflector onto the central cross member.
Drill out the 2 blind rivets holding the rear heat deflector to the cross member.
Remove the 2 screws and nuts holding the exhaust pipe onto the rear cross member.
Slide the rear heat deflector forward over the front heat deflector to expose the right brake pipe.
Remove the brake pipe from the clips and mountings
