V70 2.4T L5-2.4L Turbo VIN 58 B5244T3 (2002)
-
Position the motor on the bracket
-
Place the bracket and motor in position
-
Press the upper mounting into place
-
Install the screw for the bracket
-
Place the arms from the heater unit onto the motor levers and press into place. Take care not to damage the arms
-
Install the switch
-
Install the glove compartment. See Glove compartment, replacing, B5244T5, B5254T2 See: Body and Frame/Interior Moulding / Trim/Glove
Compartment/Service and Repair
-
Carry out self-adjustment of the damper motor end positions. This is carried out via VIDA communication.