V70 2.4T L5-2.4L Turbo VIN 58 B5244T3 (2002)
If necessary, top up with oil in the AC-compressor. See applicable specifications.
Hold aside the cable channel and install the AC-compressor by inserting it between the sub-frame and body.
Install the screws, 4 pcs. M8, for the AC-compressor and tighten.
Note! Always use new O-rings lubricated with compressor oil.
Install:
-
AC-compressor's low and high pressure hoses. On certain vehicle models, it may be easier to install and tighten the screws from above
-
the magnetic clutch connector.
Install the cable channel on the sub-frame and bolt it down.
On certain versions the air channel is installed on the control module box and then on the sub-frame.
Installing the auxiliaries belt
Install the auxiliaries belt on the AC-compressor. See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt
Tensioner/Service and Repair
Installing the battery negative cable
Fit the battery's negative cable in accordance with: Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery,
