V70 2.4T L5-2.4L Turbo VIN 58 B5244T3 (2002)
Hose/Line HVAC: Service and Repair
Wire Harness / Hoses / Pipes, Replacing
Wire Harness / Hoses / Pipes, Replacing
Removal
Preparations
-
Remove the heater.
-
Remove the fan shroud.
Wiring harness, replacement
-
Disconnect all the connectors and the sensor.
-
Cut the tie strap.
-
Replace the wiring harness.
Replacing the hoses and pipes
-
Release the quick-release connectors.
-
Remove the hose clamps.
-
Replace the hose / pipe.
NOTE: Use Oetiker pincers 3374 to slacken off and secure the Oetiker clamps.
Installation
Bleeding the fuel system
-
Connect the fuel line to vacuum pump 998 5876. Suck carefully until fuel comes out. Connect the cables and hoses.