volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Housing Assembly HVAC > < Drain Hose, Engine/Filter Housing, Replacing|Page 14674
Page 2
background image

Water pump

-

Install in reverse order.

NOTE:  Always check that there is clearance between the fuel line and water hose.

Final check

NOTE:  Start the engine and let it idle for a few seconds before starting the heater.

-

Test run the heater. Check the function of the heater.

-

Check both the coolant hoses and the fuel lines for leakage.

-

Top up the coolant if necessary.

-

Check that no diagnostic trouble codes (DTC) have been stored during the repair work.

Housing Assembly HVAC > < Drain Hose, Engine/Filter Housing, Replacing|Page 14674