V70 2.4T L5-2.4L Turbo VIN 58 B5244T3 (2002)
identity which is required to order the correct software
NOTE: Remove fuses 11C/32, 11C/25 and 11C/21 before disconnecting the control module connector.
Always check that the control module and control module box connectors do not have bent or damaged terminals or sleeves. This may have been the
cause of the fault.
Removing the connector and the cover
-
Slacken off the screw holding the connector so that it releases from the threads. Check that the screw is free with your fingers.
NOTE: Do not damage the terminal pins.
-
Use pliers to disconnect the connector. Grip the screw and pull it straight outwards so that the connector and cover follow.
-
Remove all relays and shunts bridged to the control module.
-
Release the catch on the rear. Use a screwdriver
