volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Manifold Pressure/Vacuum Sensor|Locations|Page 5860 > < Manifold Pressure/Vacuum Sensor|Locations
Page 1
background image

Manifold Pressure/Vacuum Sensor: Description and Operation

Manifold Absolute Pressure (MAP) Sensor, Intake (turbocharged Engines Only, 2002-2004) 

The manifold absolute pressure (MAP) sensor detects the pressure in the intake manifold downstream of the charge air cooler (CAC). The signal from
the sensor is primarily used by the engine control module (ECM) to check that the correct boost pressure is reached. The boost pressure is governed by
the turbocharger (TC) control valve.

The sensor, which is a piezo resistor, is grounded in the control module and supplied with 5 V from the control module.

The resistance in the sensor changes depending on the pressure in the intake manifold, giving a signal of 0 - 5 V. Low pressure results in low voltage,
high pressure in high voltage.

The engine control module (ECM) can diagnose the manifold absolute pressure (MAP) sensor. The signal can be read using VADIS.

The manifold absolute pressure (MAP) sensor is in the intake hose for the throttle body (TB).

Manifold Absolute Pressure (MAP) Sensor, Intake (turbocharged Engines Only, 2005-) 

The manifold absolute pressure (MAP) sensor detects the pressure in the intake manifold downstream of the charge air cooler (CAC). On 6 cylinder
turbocharged engines and B5254T2/-T4, the temperature of the intake air is also detected.

Pressure sensor 
The signal from the sensor is primarily used by the engine control module (ECM) to check that the correct boost pressure is reached. The boost pressure
is governed by the turbocharger (TC) control valve.

The sensor, which is a piezo resistor, is grounded in the control module and supplied with 5 V from the control module.

The resistance in the sensor changes depending on the pressure in the intake manifold, giving a signal of 0 - 5 V. Low pressure results in low voltage,
high pressure in high voltage.

Intake temperature 
The temperature sensor detects the temperature of the intake air after the charge air cooler (CAC). This data is used by the engine control module (ECM)

Manifold Pressure/Vacuum Sensor|Locations|Page 5860 > < Manifold Pressure/Vacuum Sensor|Locations