V70 2.4T L5-2.4L Turbo VIN 58 B5244T3 (2002)
Note! Check that the arrow on the cover is between the markings on the tank. If the arrow is outside the markings the fuel gauge sensor will
give an incorrect value and the float may catch against the inner wall of the tank. If not: Slacken off the screw and adjust the position of the
fuel tank unit. Tighten as above.
Right fuel tank unit, continued:
-
Install a new O-ring. Lubricate the new O-ring using petroleum jelly
-
Press the right fuel tank unit down so that the fuel line connectors are pointing forwards and to the right
-
Check that the O-ring is not trapped
-
Tighten the screw. Tighten to 60 Nm
-
Install the hoses on the fuel tank unit
-
Wipe up any fuel spillage
-
Position the wiring in the cut-out in the rubber ring.
