V70 2.4T L5-2.4L Turbo VIN 58 B5244T3 (2002)
-
Connect:
-
manometer 999 5646 to the pressure regulator hose
-
pressure regulator 999 5544 to the manometer.
NOTE: When taking readings the manometer must always hang vertically from its hook. This is to ensure that the correct values are obtained.
Set the 3 way junction connector handle in its middle position.
-
Screw out the adjustment screw for the pressure regulator completely.
-
Connect compressed air to the pressure regulator.
-
Screw in the adjustment screw for the pressure regulator so that the manometer displays the value applicable to the relevant engine. See the below
table.
-
3-way junction connector has a vent (drilled hole) where it connects to the pressure regulator. This is to facilitate setting the correct pressure.
Engine................................................................................................................................................................................................. Adjustment pressure
B5234T..................................................................................................................................................................................................................... 12.5 kPa
B5234T3...................................................................................................................................................................................................................... 30 kPa
B5244T3................................................................................................................................................................................................................... 12.5 kPa
B5254T..................................................................................................................................................................................................................... 12.5 kPa
Checking and adjusting
