V70 2.4T L5-2.4L Turbo VIN 58 B5244T3 (2002)
Remove the ABS sensor from the wheel spindle. Hang it up on the spring strut.
Remove the drive shaft screw. Counterhold using a screwdriver in the brake disc vents.
Removing the screws for the cable conduit and ground lead bracket on the sub-frame
Applies only to cars with parking heaters:
Remove the three screws for the heater on the sub-frame.
Hang or tie up the heater on the left front fender.
Unhook the fuel line from its mountings in the sub-frame.
Removing the ball joint nuts (both sides)