V70 2.4T L5-2.4L Turbo VIN 58 B5244T3 (2002)
Air Bag Control Module: Description and Operation
Input and Output Signals
Input And Output Signals
The illustration shows the control signals. In addition to these signals there is a repetitive diagnostic signal between the SRS module and all peripheral
units in the safety system. When the SRS system is started, (when the ignition is switched on), the SRS module performs a system test after which the
SRS indicator lamp in the combined instrument panel goes out. The SRS module then switches to monitor mode.
Components parts
1. SIPS module, driver's seat.
2. Driver's airbag.
3. SRS lamp.
4. Passenger Airbag.
5. SIPS, passenger seat.
6. Side impact sensor, B-post on right-hand side.
7. Seat belt tensioner, B-post on right-hand side.
8. SRS module.
9. Central electronic module (CEM).
10. Seat belt buckle, right front seat.
11. Side impact sensor, C-post on right-hand side.
12. IC, right-hand side.
13. Seat belt tensioner, right-hand side in rear seat.
14. Seat belt tensioner, rear center seat.
15. Seat belt tensioner, left-hand side in rear seat.
16. IC, left-hand side.
17. Side impact sensor, C-post on left-hand side.
18. Seat belt buckle, left front seat.
19. Seat belt tensioner, B-post on left-hand side.
20. Side impact sensor, B-post on the left-hand side.
