V70 2.4T L5-2.4L Turbo VIN 58 B5244T3 (2002)
Exposing the integrated relay / fusebox in the cargo compartment
Switch off the ignition.
Remove the left side panel in the cargo compartment.
Release the integrated relay/fusebox. Lift the catch by the upper edge and angle out the integrated relay/fusebox.
HINT: The rear panel in the side panel of the cargo compartment can be removed to change fuses.
Relay and fuse location, 11D
For the location of the relays and fuses, see:
1. Wiring diagram for relevant model year
2. Decals at both the integrated relay box and fusebox in the car
3. Pocket data book
4. Owner's Manual.
Installing the integrated relay / fusebox in the cargo compartment
-
Align the integrated relay/fusebox in the grooves in the bracket and press into place.
-
Install the left side panel in the cargo compartment.
Replacing the rear electronic module
The rear electronic module is a separate unit in the relay box in the cargo compartment.
CAUTION: New software can only be ordered after the control module has been installed in the car. VADIS reads off the new control module
identity which is required to order the correct software.
Release the relay and fuse box.
Removing the control module