volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Pressure Hose, Replacing|Page 12907 > < Pressure Hose, Replacing|Page 12905
Page 2
background image

Raise the car

Remove:

-

the splash guard under the engine

-

the tie strap around the pipe where the return hose meets the pressure hose

-

the heat deflector plate over the steering gear

-

the clip on the pipe over the steering gear.

Remove:

-

the three-way catalytic converter (TWC) mounting member

-

the SIPS (side impact protection system ) member.

Pull out the heat deflector plate over the three-way catalytic converter (TWC) as far back as possible.

Remove:

-

Screw for the clamp on the sub-frame (does not apply to AWD).

Pressure Hose, Replacing|Page 12907 > < Pressure Hose, Replacing|Page 12905