V70 2.4T L5-2.4L Turbo VIN 58 B5244T3 (2002)
999 5407 CLAMPING TOOL See: Tools and Equipment/999 5407 Clamping Tool
Removing the shock absorber
-
Remove and disassemble the spring strut. See Spring front, replacement, B5254T2 See: Suspension Spring ( Coil / Leaf )/Service and Repair/Front
Suspension/Spring Front, Replacement
-
Check that the spring strut mounting (1), spring seat (2) and rubber bump stop with boot (3) and spring are free of damage. Replace if necessary
-
Remove the ABS line holder from the old shock absorber and transfer it to the new one.
Installing the shock absorber
-
Install the holder for the ABS line. Tighten to 10 Nm
-
Assemble and install the spring strut. See Spring front, replacement, B5254T2 See: Suspension Spring ( Coil / Leaf )/Service and Repair/Front
Suspension/Spring Front, Replacement.
Note! When replacing with a new shock absorber the wheel alignment must be set. See Wheel alignment, checking / adjusting See:
Alignment/Service and Repair.
Spring Front, Replacing
Spring Front, Replacing
Special tools
951 2050
951 2911
951 2914
999 5467
999 5469
Removal
Note: As the illustrations in this service information are used for different model years and / or models, some variation may occur. However, the
essential information in the illustrations is always correct.
Removing the spring strut