V70 2.4T L5-2.4L Turbo VIN 58 B5244T3 (2002)
Wheel Bearing: Service and Repair
Replacing the Front Wheel Hub
Front Wheel Hub, Replacing
Special tools
951 2050
Removal
Removing brake calipers
Remove:
-
the wheel
-
the brake caliper and limiter screws.
Hang the caliper up using a piece of wire.
Removing the drive shaft
Remove:
-
the drive shaft screw. Use a screwdriver as a counterhold on the brake disc
-
the locating pin holding the brake disc
-
the brake disc.
Slacken off the end of the drive shaft in the hub by knocking the drive shaft into the hub approximately 10-15 mm.
Use a rubber or copper mallet.
Exposing the control arm