V70 2.4T L5-2.4L Turbo VIN 58 B5244T3 (2002)
The gear-shift position sensor is mounted on the top of the transmission housing, on the gear shift linkage rod. The gear selector contains a Park
Neutral position (PNP) switch and connectors which inform the transmission control module (TCM) about which gear is selected and if the back-up
gear is selected so that the reversing lamps can be lit. The gear-shift position sensor is a position switch which is supplied via +15. A number of
trailing contacts supply power to the sensor outputs. The combination of pins A, B, C and PA indicate the current gear selector position (see the table).
The trailing contacts can either be closed or open.
There are diagnostics for the gear-shift position sensor.
Table for the gear-shift position sensor
The value indicates the position of the gear-shift position sensor (A, B, C and PA), see the table.
+ = High signal (open)
- = Low signal (grounded)
Gear selector module (GSM)
