V70 2.4T L5-2.4L Turbo VIN 58 B5244T3 (2002)
Installing the sealing ring
Install sleeve 7087-1 in the end of the shaft. Lubricate the lip of the new sealing ring. Use grease 116 1241-3 (80g). Position the seal on the sleeve.
Knock the seal into the bevel gear. Use drift 999 7087 Drift See: Tools and Equipment/999 7087 Drift together with spacer ring 7086-1. Ensure that the
tool goes towards the bevel gear housing.
Check that sleeve 7087-1 is removed with the tool.
Finishing
Installing the bevel gear
Install the bevel gear.
Filling with oil
Fill with new oil. See Replacing the pinion seal for the bevel gear See: Pinion Seal Bevel Gear, Replacing
