V70 2.4T L5-2.4L Turbo VIN 58 B5244T3 (2002)
Knock the seal into the bevel gear. Use drift 999 7087 Drift See: Tools and Equipment/999 7087 Drift together with spacer ring 7086-1. Ensure that the
tool goes towards the bevel gear housing.
Check that sleeve 7087-1 is removed with the tool.
Finishing
Installing the bevel gear
Install the bevel gear.
Filling with oil
Fill with new oil. See Replacing the pinion seal for the bevel gear See: Pinion Seal Bevel Gear, Replacing
Sealing Ring, Gear Shift Linkage Rod, Replacing
Sealing ring, gear shift linkage rod, replacing
Special tools:
999 5476 PUNCH See: Tools and Equipment/999 5476 Punch
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information is always correct.
Removing engine compartment components
