V70 2.4T L5-2.4L Turbo VIN 58 B5244T3 (2002)
Install lifting beam999 5716 directly above the engine lifting eye.
Position the lifting beam brackets as illustrated.
Connect hook 999 5460 to the lifting eye at the rear edge of the engine. Apply the hook to take the load off the engine pads.
Lifting the car
NOTE: Position the front lift arms so that they do not obstruct the sub-frame support plates.
Remove:
-
the front wheels
-
the splash guard under the engine
-
the outer front protection on both sides
-
both the screws for the front splash guard. Press in the catches at the front edge of the cover. Pull the cover backwards.
Removing the screw for the right drive shaft
