V70 2.4T L5-2.4L Turbo VIN 58 B5244T3 (2002)
Twist in the tab on the cable harness holder.
Install the screw for the gear-shift position sensor and holder.
Tighten to 25 Nm.
Install the lever on the gear shift linkage rod. Tighten the nut.
Tighten to 16 Nm.
Installing The Connectors And The Cable Harness
Hook the connectors into place on the mounting. Connect the connectors.
Install:
-
the tie straps around the cable harness. Secure the cable Cable harness SRS system, repair harness in the cover for the control system
-
the mounting for the cable harness on the bracket for the air cleaner (ACL)
-
the gear selector cable and bracket. Tighten to 25 Nm. Connect the cable to the lever.
Installing The Air Cleaner (ACL) Housing
